DAD LINK 305 Meter SF/UTP Cat.6 Network Cable
DAD LINK SF/UTP Cat.6 Network Cable
305 Meter Roll
23 AWG Solid Copper
LSZH Jacket
250MHz
Double Shielded (Foil + Braid)
Datasheet
DAD LINK SF/UTP Cat.6 Network Cable – 305 m of 23 AWG solid bare copper carrying both a foil screen and a braided screen over four twisted pairs. The highest shielding level in the Cat.6 range.
SF/UTP is specified for industrial environments with heavy electromagnetic interference: factories, power substations, hospitals with MRI equipment, oil and gas facilities, and any run within 1 m of three-phase distribution or variable-frequency drives. The braid gives low-impedance grounding continuity; the foil gives broadband coverage across the Cat.6 range. LSZH sheath for occupied indoor spaces — low smoke, zero halogen when burning.
Key Specifications
- Category: Cat.6 (Class E)
- Standards: ISO/IEC 11801, ANSI/TIA-568.2-D
- Bandwidth: 250 MHz — 1 Gbps to 100 m
- Conductor: solid bare copper, 0.565 ± 0.005 mm (23 AWG)
- Insulation: HDPE, 1.12 ± 0.05 mm
- Inner screen: Mylar + Al/Mylar foil with drain wire
- Outer screen: aluminium-magnesium alloy braid, ≥ 40% coverage
- Sheath: LSZH (RoHS compliant), 0.55 ± 0.05 mm
- Outside diameter: 7.8 ± 0.4 mm
- Impedance: 100 ± 15 Ω (1–250 MHz)
- DC resistance: ≤ 9.38 Ω/100 m · unbalance ≤ 5.0%
- Delay skew: ≤ 45 ns/100 m
- Cold bend: −20 ± 2 °C, 8× cable O.D., no visible cracks
- Length: 305 ± 1.5 m, wooden tray and carton · rip-cord included
Transmission Performance (per 100 m)
| Frequency | Return loss | Insertion loss | NEXT |
|---|---|---|---|
| 100 MHz | ≥ 20.1 dB | ≤ 19.80 dB | ≥ 44.3 dB |
| 200 MHz | ≥ 18.0 dB | ≤ 28.98 dB | ≥ 39.8 dB |
| 250 MHz | ≥ 17.3 dB | ≤ 32.85 dB | ≥ 38.3 dB |
For lighter shielding, see F/UTP Cat.6 or U/UTP Cat.6. For 10 Gbps, use S/FTP Cat.6A. For outdoor runs, see SF/UTP Cat.6 Outdoor. Guide: Cat6 vs Cat6A: Which Cable to Choose.