The DAD LINK Network Cable Modular Crimping Tools (DAD.TL-786C) is a modular crimping tool for terminating standard RJ45 plugs on network cable. It seats the contacts into the conductors and closes the strain relief on the jacket in one squeeze, which is the operation every field-made copper lead ends with. DAD LINK supplies it in Iraq through authorized distributors.
Standard closed-face plugs remain the default on most Iraqi installations, so this is the tool an installer reaches for on a normal day: making up short leads on site in a Baghdad server room, re-terminating a damaged end on a camera run, or fitting plugs from a spool for a new office fit-out in Erbil rather than waiting on factory patch leads to arrive.
Specification
- Part number: DAD.TL-786C
- Type: modular crimping tool
- Plug compatibility: standard closed-face modular RJ45 plugs
- Action: seats the contacts and closes the strain relief in one stroke
Which tool do you need
Choose on the plug, not on the cable. Standard plugs take this tool. Pass-through plugs, where the conductors exit the front face, need the EZ pass-through tool, which trims the protruding wires flush as it crimps. A standard tool used on a pass-through plug leaves the conductors uncut, and a pass-through tool used on a standard plug adds a cut the plug does not need. Pin order matters more than either: follow T568A vs T568B consistently, and settle the cable grade with the Cat6 vs Cat6A guide. The rest of the range is under Accessorises.
For availability across Iraq, contact an authorized distributor.