The DAD LINK Power Cable 1.8M GE/C19 is a 1.8 meter mains lead with a European plug at the wall end and an IEC 60320 C19 connector at the equipment end, the larger coupler that mates the C20 inlet found on higher draw equipment such as larger UPS units, blade chassis and high capacity power distribution units. DAD LINK supplies it across Iraq through authorized distributors.
C19 is a specification decision, not a preference. If the inlet on the equipment is the wide rectangular C20, a C13 lead physically will not fit and nothing should be improvised in its place. Data rooms in Baghdad and Erbil meet this at the moment the UPS is upgraded: the old unit took a C13 lead, the replacement takes C19, and the installation stalls over a cord.
Specification
- Part number: GE-C19
- Length: 1.8 m
- Wall end: European plug pattern
- Equipment end: IEC 60320 C19 connector, mating with the C20 inlet. C19 and C20 are the higher current pairing in the standard, physically larger than C13 and C14 and not interchangeable with them
Which variant do you need
Read the inlet moulding on the equipment. C20 takes this cord. C14 takes a C13 cord. Inside the cabinet, device to PDU runs use the C14/C13 bridge cord. If the wall outlet is the British three pin pattern rather than two pin, confirm the plug variant with your distributor before ordering, since the C19 lead is listed in one plug version only under Power Cables.
For availability across Iraq, contact an authorized distributor.