The DAD LINK Cable Power 1.8M UK/C1 is a 1.8 meter mains lead with a British three pin plug at the wall end and the small IEC 60320 C1 two pin connector at the equipment end, the coupler fitted to low current double insulated devices. DAD LINK supplies it across Iraq through authorized distributors.
C1 is the least common of the IEC couplers on a network site, which is exactly why it is worth stocking. It turns up on small chargers, audio and test gear, label printers and handheld tools, and when the original lead is lost the equipment sits idle because no generic cord in the drawer fits. A contractor working across Erbil and Sulaymaniyah carries one or two rather than none.
Specification
- Part number: UK-C1
- Length: 1.8 m
- Wall end: British three pin plug pattern
- Equipment end: IEC 60320 C1 connector, two pin, unearthed, mating with a C2 appliance inlet on class II double insulated equipment
Which variant do you need
Identify the inlet on the device, not the plug on the wall. The C1 is small and flat with two pins. It is not the figure 8 connector: that is the C7, which mates a C8 inlet and is a different part. If the inlet is the three pin clover, order the UK/C6 cord. If it is the rectangular C14, order the UK/C13 cord. The complete set is under Power Cables.
For availability in Erbil, Baghdad, Sulaymaniyah and Duhok, contact an authorized distributor.