DAD LINK Socket 1 Port Face Layout

The DAD LINK Socket 1 Port Face Layout (WPS-1P) is a single port network faceplate: a wall plate with one opening that accepts a snap-in keystone jack, presenting one RJ45 outlet at the end of a structured cabling drop. DAD LINK brands and supplies it in Iraq through authorized distributors.

One port is the right answer wherever the outlet serves a single fixed device and will never grow. Ceiling and wall access points, IP cameras on a corridor run, network printers, door controllers, digital signage screens and the outlet behind a reception desk all take one drop and keep it. Fitting a two port plate there leaves a blank hole that collects dust and invites someone to hang an unmanaged switch off it later.

Specification

• Part number: WPS-1P
• Ports: one
• Module format: snap-in keystone opening, so the jack grade is chosen separately from the plate
• Supplied as: faceplate only. Keystone jacks are ordered separately

How to choose

Decide the port count first, then the jack. Two ports at a desk position is the normal office standard, so use the 2 port faceplate for workstation outlets and keep this single port plate for fixed-device drops. Inside an electrical enclosure the same modules mount on the DIN rail keystone holder instead. The jack is where Cat.6 or Cat.6A and UTP or FTP is settled: see the keystone jack range. Fix outlet positions and counts before pulling cable, using the structured cabling planning guide.

For availability in Erbil, Baghdad, Sulaymaniyah and Duhok, contact an authorized distributor.